Please complete the below form and a member of our expert team will respond to your enquiry as quickly as possible. Thank you.
Please select your desired RAL/Bespoke Colour from the colour chart or enter your own RAL colour code below. Please note, RAL colour options are bespoke and cannot be cancelled, and carry an additional lead time to be manufactured
This product is available in the following configurations:
Name | Colour | Manufacturer SKU | Delivery Time |
---|---|---|---|
Novellini Novosolid Slate Effect Shower Tray Black - 1000x1000mm |
![]() |
NOS1004-28 | Next Day |
Novellini Novosolid Slate Effect Shower Tray White - 1000x1000mm |
![]() |
NOS1004-30 | Next Day |
Brilliant design and excellent construction combine in the modern design on the Novosolid tray from Novellini. Designed with adaptability in mind, these trays can be adjusted to your bathroom on site, allowing you to have a custom size or shape of tray.
Finished with a non polluting, uniform colour and a soft non slip surface for safety and security in your shower. The durable finish of this tray covers a natural high quality resin which is mixed with natural Dolomite Marble, which has a good chemical and physical purity.
To clean any traces of glue and cement mortar use a descaler called Fugasoap by KERAKOLL or DETERTEK by FILA, as these are specific for the removal of debris from construction works and are also used for the removal of other components such as salt, rust an limescale. Always read the instructions before use. DO NOT RUB, let the product act; NEVER USE PADS (SCOTCH BRITE, or NATURAL FIBER) nor SOLVENTS, ACID, ALKALI OR ABRASIVE. After cleaning, rinse thoroughly and ensure sufficient ventilation of the bathroom.
Soap and water applied with a non-abrasive sponge or soft cotton cloth. NEVER USE PADS (SCOTCH BRITE, or NATURAL FIBER) nor SOLVENTS, ACID, ALKALI OR ABRASIVE, and do not spill drain cleaner over the shower tray. Use liquid detergents with a neutral pH only, without ammonia or substances with alcohol. After cleaning, rinse it with clean water to eliminate any residue. Not following these guidelines may cause discolouring or a dulling of the colour of the tray.
The gluing of the various elements must be done using SIKAFLEX (SIKA), SUPERFLEX (KERAKOLL) or ULTRABOND MS RAPID (Mapei) and sealing with ceramic grouting material or non acidic silicone. One free tube of colour matched Adhesive and Sealant is provided with every tray
Yes they can. If required you can cut your shower tray on-site before installation. Protect the product properly and then use a diamond disc saw (it is recommended to cut with a FESTOOL with guides to make a straight cut).
A high quality shower tray waste is included with your shower tray. It is a syphonic trap, with its odour sealant ability matching the European quality standards. It is equipped with an easy cleaning system, simply remove the grid and you will see a handle, pull the handle and remove the piece, clean it and replace.
This product appears in the below categories: