
Geberit H130 Duofix Urinal Frame For Tank Fed Water Supply:
Size:
1120mm Height
Ultramarine Blue
Powder Coated finish
For a dedicated tank fed water supply only
9mm diameter Holes for easy fastening in wood construction
Galvanised Leg Supports are included, and can be adjusted to between 0 - 200mm.
Self-supporting
C profile 40/40mm is supplied
Legs can be retracted to 50mm
Rotating Foot Plate supplied for installation in UW50 and UW75 profiles
Height to be between 112 cm to 130 cm, depending on urinal
Water supply connection 1/2" (compatible with MeplaFix)
The Water Supply Connection can be installed without tools
The Water Supply Connection is radially sealed
Stop valve has a throttle pre-mounted
Conduit Pipe pre-mounted for rinsing the pipe
Terminal provided
The protection cover protects the service opening against moisture and dirt and can be mounted without tools and cut to length
Comes with flexible connection hose between concealed housing and inlet
The Inlet is 32mm in diameter, and the height can be adjusted
Fastening included for urinal with M8 threaded rod, adjustable height and distance
Includes fastening for outlet bend sound-absorbing and height-adjustable
Supplied with self-locking feet for tool-free alignment of the frame
Additional fastening possible for urinal with accessories
Conversion possible for urinals with spray head with accessories
Application Purpose:
Suitable for installation of wall-hung urinals
For installation in a half-height or room-height Duofix system wall in front of a solid or drywall construction
Suitable for installing in a load bearing stud wall
Suitable for mounting in front of a solid or drywall construction
Can be fixed to a level of 0 - 200mm
Compatible with Geberit concealed urinal control
Not suitable for urinals with spreaders
Technical Details:
Flow rate at 1 bar without flow limiter: 0.3 l/s
Flow rate at 1 bar with flow limiter: 0.24 l/s
Relative humidity: < 100%
Operating Pressure: 1-8 bar
Maximum test pressure water: 16 bar
Maximum test pressure air / inert gas: 3 bar
Maximum operating temperature of water: 30 °C
Plumbing System:
Concealed housing with water section
Protection box with cover
Water supply connection R 1/2"
The Connection pipe between the inlet diameter 32mm and urinal, including seal on urinal
The Suction trap is 50mm in diameter, including the seal to the urinal
Outlet pipe, PVC, diameter 50mm, including the seal on the suction trap
2 threaded rods M8 for urinal fastening
Fastening material
To be installed with a check valve or similar providing backflow prevention protection
5 Year Guarantee
Manufacturing Code:
Geberit H130 Duofix Urinal Frame For Tank Fed Water Supply - 111.623.00.1